TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 626 of 796
INSPECTION PROCEDURES - Continued
7.
Rivets.
Inspect for loose, broken, or missing rivets.
8.
Rusted Surfaces.
Inspect for pitting, holes, or severe damage.
9.
Studs.
Inspect all studs for damaged or stripped threads, bent or loose condition, or for any signs of
stretching.
END OF TASK
INSTALLATION PROCEDURES
NOTE
Cleanliness is essential in all assembly operations. Dirt and dust, even in small quantities,
are abrasive. Parts must be cleaned as specified and kept clean. Wrap or cover parts and
components when assembly procedures are not completed immediately.
1.
Assemble subassemblies first, combine into major components where possible, and then install to form a
complete component.
2.
Replace all damaged screws, washers, nuts, keys, springs, or other like items before installation of an item.
3.
Notify maintenance when critical torque values are specified in the assembly procedure.
4.
Prepare and maintain repair and replacement data and statistics records carefully in accordance with (IAW)
DA PAM 750-8 (WP 0131).
END OF TASK
MAXIMUM LIFTING CAPACITY FOR PERSONNEL
NOTE
Table 1 provides guidance on the maximum weight a single person may lift under the
described conditions.
Table 1.
Maximum Lifting Capacity for Personnel.
HANDLING FUNCTION
POPULATION
MALE AND FEMALE
MALE
Lift an object from the floor and place it on a surface equal to
or greater than 5 ft (152 cm) above the floor.
31 lb (14 kg)
48 lb (21.9 kg)
Lift object from the floor and place it on a surface not greater
than 5 ft (152 cm) above the floor.
37 lb (16.8 kg)
56 lb (25.4 kg)
Lift an object from the floor and place it on a surface not
greater than 3.0 ft (91 cm) above the floor.
44 lb (20 kg)
87 lb (39.5 kg)
Carry an object 33 ft (10 m) or less.
42 lb (19 kg)
82 lb (37.2 kg)
END OF TASK
END OF WORK PACKAGE
TM 9-2350-256-10
0102
0102-4
Back to Top
