TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 631 of 796

INSTALLATION - Continued

WARNING

•

Adhesive, primer, sealing compounds, and isopropyl alcohol are toxic and

flammable. Always use in well-ventilated areas, away from heat, sparks, and

flames. Do not breathe fumes. Continued exposure can cause dizziness and

irritate your eyes and throat. Failure to comply may result in personnel injury.

•

Sealing compounds and adhesives bond immediately on contact with eyes, skin,

or clothing. Do not allow compounds to contact skin or eyes. Use eye protection or

face shield and protective gloves. If sealing compound or adhesive contacts eyes,

try to keep eyes open and flush with water for 15 minutes. Seek immediate

medical attention. Failure to comply may result in personnel injury.

2.

Apply silicone compound to threads of six screws (Figure 2, Item 6).

3.

Install hull access covers (Figure 2, Items 4, 7, or 8) and gaskets (Figure 2, Items 1, 2, or 3) on hull with six

screws (Figure 2, Item 6) and six lockwashers (Figure 2, Item 5).

Figure 2.

Hull Access Covers.

END OF TASK

END OF WORK PACKAGE

TM 9-2350-256-10

0104

0104-3/blank