TM 9-2350-256-20-2
0368 00
Removal
1.
Remove bearing unit housing assembly (see WP 0365 00).
Disassembly
NOTE
Seal (1) and lubrication fitting (2) are not part of left-center brake shaft bearing unit housing assembly.
1.
Remove lubrication fitting (2) from housing (3).
2.
Pry seals (1 and 4) out of housing (3).
3.
Remove retaining ring (5) from housing (3).
4.
Remove ball bearing (6) from housing (3).
0368 00-2