TM-9-2350-256-20-2
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2
JUNE 2005
TM-9-2350-256-20-2 - Page 909 of 1440
TM 9-2350-256-20-2
0371 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
LINKAGE
ROLLER
PLATES
REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Materials/Parts
Bolts (8) (item 339, WP 0491 00)
Materials/Parts (cont.)
Lockwashers (6) (item 642, WP 0491 00)
Nuts (6) (item 761, WP 0491 00)
Washers, flat (6) (item 540, WP 0491 00)
NOTE
Removal and installation procedures are the same for all three linkage roller plates.
Removal
1.
Remove eight bolts (1) and eight rollers (2) from linkage roller plate (3).
2.
Remove linkage roller plate (3) by removing two nuts (4), two lockwashers (5), and two flat washers (6).
Installation
1.
Install linkage roller plate (3) with two flat washers (6), two lockwashers (5), and two nuts (4).
2.
Install eight rollers (2) and eight bolts (1) to linkage roller plate (3).
END OF WORK PACKAGE
0371 00-1/2 blank
Back to Top
