TM 9-2350-260-20-1-2
MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 3 of 6)
7.
Using 1/2 inch wrench, remove loop clamp (K) that
secures left hose (L) to engine shroud.
8.
Using 1/2 inch socket, remove loop clamp (K) that
secures right hose (M) to engine shroud.
9.
Remove hose grommets from left and right side
engine shrouds.
10.
Remove hoses (M) and (L) to inside.
INSPECTION:
1.
Check hoses for cracks, holes, and leaks.
2.
Check hose connectors for stripped thread and
wear.
3.
Check loop clamps for serviceability.
4.
Replace parts as needed.
INSTALLATION:
1.
Using 1-1/8 inch socket, secure connector (A) with
flat washer and retaining nut (C).
Go on to Sheet 4
TA147520
6-66