TM 9-2350-260-20-1-2
MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 5 of 6)
7.
Position hose (E) so that free end passes through
left engine shroud.
Using fingers and screwdriver,
position grommet (H) over hose and into shroud.
8.
Using 1/2 inch wrench and 1/2 inch socket, secure
each he with loop clamp.
9.
Using 11/16 inch wrench, connect hose connector
(K) to elbow (J) on right turbosupercharger.
10.
Repeat step 9 on left turbosupercharger to
connect hose (E).
Go on to Sheet 6
TA147522
6-68