TM 9-2350-260-20-1-2
OIL COOLER VENT HOSES AND FITTINGS REPLACEMENT (2D ENGINE) (Sheet 3 of 3)
INSTALLATION:
1.
Install new packing into two adapters (A).
2.
Using 11/16 inch wrench, install two adapters (A) into oil coolers.
3.
Using 9/16 inch wrench, install adapter (E).
4.
Using 9/16 inch wrench, install two hose assemblies (B) to two adapters (A).
5.
Holding tee tube C with 7/16 inch open end wrench and using 9/16 inch wrench, install two hose assemblies () to
tee tub (C).
6.
Using 9/16 inch wrench, install hose assembly (D) to tee tube (C).
7.
Using 9/16 inch wrench, install hose assembly (D) to adapter (E).
8.
Using socket, install four screws (F) holding loop clamps.
9.
Install powerplant (page 5-40).
End of Task
TA147529
6-76