TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 161 of 772

TM 9-2350-260-20-1-2

ENGINE ACCESS COVERS (LEFT BANK) REPLACEMENT (2A ENGINE) (Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

6-84

Installation

6-86

TOOLS:

3/8 in. combination box and open end wrench

1/2 in. socket with 1/2 in. drive

5 in. extension with 1/2 in. drive

Ratchet with 1/2 in. drive

SUPPLIES:

Gasket (10935621)

Preformed packing (MS28775-327)

Lockwasher (7410218) (2 required)

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-2)

Remove engine oil level gage cap and access cover (page 6-34)

REMOVAL:

1.

Open cap assembly (A) and remove oil level gage.

2.

Using 3/8 inch wrench, disconnect fuel drain tubes

(B) from valves (C).

3.

Open traps (D) and remove fuel drain hoses (E).

4.

Using 1/2 inch socket, remove two screws (F)

securing valves (C) and bracket (G).

5.

Remove bracket (G), valves (C), and hoses (E) as a unit from engine.

Go on to Sheet 2

TA147537

6-84