TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 169 of 772
TM 9-2350-260-20-1-2
ENGINE ACCESS COVERS (LEFT BANK) REPLACEMENT (2D ENGINE) (Sheet 5 of 5)
8.
Position new gasket (G) and cap assembly (H) to
front engine access cover (J).
9.
Install two screws (K) and lockwashers (L) to
secure cap assembly (H) to front engine access
cover (J).
10.
Using socket, tighten screws (K).
11.
Position front engine access cover (J) and cap
assembly (H) in place on engine.
12.
Install eight screws and washers (M) to secure
front engine access cover.
13.
Using socket, tighten screws (M).
14.
Position pate with electrical connectors (N) on
engine.
15.
Install four screws and washers (P) to secure plate
with electrical connectors (N).
16.
Using socket, tighten screws (P).
17.
Install engine shroud (page 9-3).
18.
Install powerplant (page 5-40).
End of Task
TA147545
6-92
Back to Top
