TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 176 of 772

TM 9-2350-260-20-1-2

POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (20 ENGINE) (Sheet 2 of 9)

NOTE

Because of space limitations, it may be necessary to interchange like-size sockets

and wrenches to get at a particular screw.

REMOVAL:

1.

Using 1/2 inch socket and extension, remove two

assembled washer bolts and cushioned clamps

(A).

2.

Using 1/2 inch socket and extension, remove

washer bolt (B).

3.

While supporting ignition unit (C), and using 1/2

inch wrench, remove two capscrews (D).

4.

Remove ignition unit (C) with clamps and leads

from frame.

5.

Using 1/2 inch socket, remove two capscrews (E)

and self-locking nuts from bracket.

Use 1/2 inch

wrench to keep nuts from turning.

Throw self-

locking nut away.

6.

Using 9/16 inch socket, remove screw with

cushioned clamp (F) holding cable assembly.

Use

9/16 inch wrench to keep nut from turning.

Go on to Sheet 3

TA147551

6-99