TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 170 of 772
TM 9-2350-260-20-1-2
POWERPLANT OIL COOLERS FRAME AND BRACKETS REPLACEMENT (2A ENGINE) (Sheet 1 of 5)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
6-94
Installation
6-95
TOOLS:
Flat-tip screwdriver
1/2 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
SUPPLIES:
Self-locking nut (MS21045-5) (12 required)
PRELIMINARY PROCEDURES:
Remove powerplant (page 5-2)
Remove engine shroud (page 9-2)
Remove engine oil cooler (page 6-120)
Remove transmission oil cooler (page 6-134)
Remove engine access covers (page 6-77 or 6-84)
Remove engine cooling fan shroud (page 9-52)
Remove engine cooling fans (page 9-48)
Remove centrifugal fan housing (page 9-59)
NOTE
Replacement of the right and left bank oil cooler frames and brackets are similar.
Only the right bank is shown.
Go on to Sheet 2
6-93
Back to Top
