TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 164 of 772

TM 9-2350-260-20-1

ENGINE ACCESS COVERS (LEFT BANK) REPLACEMENT (2A ENGINE) (Sheet 4 of 4)

7.

Using 1/2 inch socket, install and tighten five

screws (H) securing cover to engine.

8.

Position five traps (J) onto cover and engine.

9.

Using 1/2 inch socket, install and tighten five screws (K) securing straps (J).

10.

Position bracket (L) with valves (M) and fuel drain hoses (N) onto cover and engine.

11.

Using socket, install and tighten two bolts (P) securing bracket (L).

12.

Position drain hoses (N) into straps (J) and bend straps ( over hoses (N).

13.

Position drain tubes (Q) onto valves (M).

Using 3/8 inch wrench, tighten tube nuts onto valves.

14.

Open cap assembly (C) and insert oil level gage.

15.

Install powerplant (page 5-14).

End of Task

TA147540

6-87