TM 9-2350-260-20-1-2
ENGINE ACCESS COVERS (RIGHT BANK) REPLACEMENT (20 ENGINE) (Sheet 5 of 5)
9.
Position rear engine access cover (J) in place on engine.
10.
Install 12 screws and washers (K).
Do not install screws in last holes toward front of engine.
Using socket, tighten
12 screws (K).
11.
Position front engine access cover (L) in place on engine.
12.
Install six screws and washers (M).
Do not install screw in four holes (N).
Using socket tighten six screws (M).
13.
Position plate with electrical connector (P) on front
engine access cover (L).
Aline screw holes in
plate (P) with those in front engine access plate).
14.
Install four screws and washers (Q) to secure
plate to shroud.
Using socket, tighten four screws
(Q).
15.
Install engine shroud (page 9-3).
16.
Install powerplant (page 5-40).
End of Task
TA147536
6-83