TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 175 of 772

TM 9-2350-260-20-1-2

POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 1 of 9)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

6-99

Installation

6-102

TOOLS:

Ratchet with 1/2 in. drive

1/2 in. combination box and

Hinged handle with 1/2 in. drive

open end wrench

6 in. extension with 1/2 in. drive

7/16 in. combination box and

1/2 in. socket

with 1/2 in. drive

open end wrench

9/16 in. socket with 1/2 in. drive

9/16 in. combination box and

Alining punch

open end wrench

3/4 in. combination box and

11/16 in. socket with 1/2 in. drive

open end wrench

SUPPLIES:

Self-locking nut (MS21044N5) (2 required)

Self-locking nuts (MS21045-6) (6 required)

Self-locking nut (MS210450) (6 required)

PERSONNEL:

Two

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-25)

Remove engine shroud (page 9-2)

Remove engine right oil cooler (page 6-128)

Remove transmission right oil cooler (page 6-145)

Remove engine cooling fan shroud (page 942)

Remove engine cooling fans (page 9-48)

Remove centrifugal fan housings (page 99)

Remove engine access covers (right bank) (page 6-79)

Go on to Sheet 2

TA147550

6-98