TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 184 of 772

TM 9-2350-260-20-1-2

POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 1 of 9)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

6-108

Installation

6-112

TOOLS: Ratchet with 1/2 in. drive

Alining punch

5 in. extension with 1/2 in. drive

1/2 in. combination box and

1/2 in. socket with 1/2 in. drive

open end wrench

5/8 in. socket with 1/2 in. drive

3/8 in. combination box and

9/16 in. socket with 1/2 in. drive

open end wrench

11/16 in. socket with 1/2 in. drive

9/16 in. combination box and

4 in. flat-tip screwdriver

open end wrench

SUPPLIES:

Lockwasher (7410218) (4 required)

Self-locking nut (MS21045-6) (2 required)

Self-locking nut (MS21044N5) (8 required)

Self-locking nut (MS21045-7) (6 required)

Self-locking nut (8764639)

Self-locking nut (MS21045-5)

PERSONNEL:

Two

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-1)

Remove engine shroud (page 9-2)

Remove centrifugal fan housing (page 9-59)

Remove engine cooling fans (page 9-48)

Remove engine cooling fan shroud (page 9-52)

Remove powerplant access (left bank) covers (page 6-88)

Remove engine left oil cooler (page 6-93)

Remove transmission left oil cooler (page 6-145)

Go on to Sheet 2

TA147559

6-107