TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 192 of 772

TM 9-2350-260-20-1-2

POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 9 of 9)

22.

Place mounting bracket (AA) in position and, using

5/8 inch socket, tighten three screws (AB).

23.

Position fuel-water separator (AC) to mounting

bracket (AA).

CAUTION

Mounting bracket (AA) is made of

aluminum.

Overtightening

of

capscrews (AD) could strip threads.

24.

Using 1/2 inch socket, install four capscrews, new

lockwashers, and flat washers (AD).

25.

Using screwdriver and 3/8 inch wrench, install clamp (AE) if removed.

26.

Install transmission left oil cooler (page 6-149).

27.

Install engine left oil cooler (page 6-131).

28.

Install powerplant access covers (left bank) (page 6-91).

29.

Install engine cooling fan shroud (page 9-55).

30.

Install engine cooling fans (page 9-49).

31.

Install centrifugal fan housing (page 9-60).

32.

Install engine shroud (page 9-3).

33.

Install powerplant (page 5-40).

End of Task

TA147567

6-115