TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 193 of 772

TM 9-2350-260-20-1-2

ENGINE OIL COOLER SCREEN REPLACEMENT (Sheet 1 of 2)

TOOLS:

1/2 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

5 in. extension with 1/2 in. drive

PRELIMINARY PROCEDURE: Remove powerplant (page 5-1)

NOTE

If removing screens on 2A engine, go to step 3.

REMOVAL:

1.

Using socket with extension through harness and

into bracket (A), remove two screws with

assembled washers (B).

2.

Pull harness and bracket (A) to left side of oil

cooler screen for access to screws (C).

3.

Using socket, remove four screws and assembled

washers (C).

4.

Lift cooler screen away.

INSPECTION:

1.

Check screen and brackets for cracks, tears,

bending, and dents.

2.

Replace bad parts.

Go on to Sheet 2

TA147568

6-116