TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 187 of 772

TM 9-2350-260-20-1-2

POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 4 of 9)

NOTE

It may be necessary to depress three flanges (T) on frame bottom during removal

to clear protruding obstacles on the engine.

13.

Remove oil cooler support frame (S).

14.

Using 9/16 inch socket with 5 inch extension and

9/16 inch wrench, remove self-locking nut (U).

Throw nut away.

15.

Using 1/2 inch socket with extension, remove nub

(V).

16.

Move clamp (W) to up position and remove

bracket (X) and screw (Y).

17.

Remove screw (Y) from bracket (X).

18.

Using 1/2 inch socket and 1/2 inch wrench,

remove screw and nut (Z).

19.

Remove clamp (AA) from bracket (AB) and fuel

line.

20.

Using 1/2 inch socket with extension, remove self-

locking nuts (AC).

Throw nuts away.

21.

Remove bracket (AB).

22.

Using 1/2 inch socket with extension, remove four

brackets (AD).

Go on to Sheet 5

TA147562

6-110