TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 185 of 772

TM 9-2350-260-20-1-2

POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 2 of 9)

NOTE

Because of space limitations, it may be necessary to interchange like-size sockets

and wrenches to get at a particular screw.

REMOVAL:

NOTE

It

may

be

necessary

to

use

screwdriver and 3/8 inch wrench to

remove clamp (A) and move tube (B)

before fuel-water separator filter (C)

can be lowered.

1.

Using 1/2 inch socket, remove four capscrews,

lockwashers, and flat washers (D).

Throw

lockwashers away.

5.

Using 1/2 inch socket, remove screw and clamp

(H).

6.

Using 1/2 inch socket with extension and 1/2 inch

wrench, remove two screws and nuts (J).

7.

Remove ignition unit (K) with clamps and leads

from frame.

2.

Lower fuel-water separator filter (C) away from

mounting bracket (E).

3.

Using 5/8 inch socket, remove three screws (F)

securing mounting bracket (E) to engine.

Remove

mounting bracket (E).

4.

Using 1/2 inch socket, remove three assembled

washer bolts (G).

Go on to Sheet 3

TA147560

6-108