TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 178 of 772

TM 9-2350-260-20-1-2

POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 4 of 9)

NOTE

It may be necessary to depress three flanges (L) on frame bottom during removal

to clear protruding obstacles on the engine.

11.

Remove oil cooler support frame.

NOTE

Five of the six cooler frame upper brackets are identical and are mounted the same

way.

The sixth bracket (M) is located closest to the engine flywheel end and

requires three shims and an additional screw with self-locking nut for proper

installation.

12.

Using 9/16 inch socket with extension, remove nut

securing shims (M) Hold screw head below shims

with 9/16 inch wrench to keep screw from turning.

Go on to Sheet 5

TA147553

6-101