TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 180 of 772

TM 9-2350-260-20-1-2

POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 6 of 9)

NOTE

Five of the six cooler frame upper brackets are identical and are mounted the same

way.

The sixth bracket (C) is located closest to the engine flywheel end and

requires shims and an additional screw and self-locking nut for proper installation.

3.

Using 9/16 inch socket with extension, install

shims (C).

Hold screw head below shims with

9/16 inch wrench to keep screw from tuning.

4.

Using 1/2 inch socket with extension, install six

brackets (D).

NOTE

It may be necessary to depress three flanges (E) on frame bottom during

installation to clear protruding obstacles on the engine.

5.

Install oil cooler support frame.

Go on to Sheet 7

TA147555

6-103