TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 190 of 772

TM 9-2350-260-20-1-2

POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 7 of 9)

NOTE

It may be necessary to pull frame (P) out and depress three flanges (Q) on frame

bottom during installation to clear protruding obstacles on the engine.

It may be

necessary to loosen and move brackets (B), (F), and (L) slightly before oil cooler

support frame can be installed.

12.

Install oil cooler support frame.

13.

Using alining punch, aline screw holes and, using

1/2 inch socket with extension, install five screws

(R).

14.

Using 1/2 inch socket and 1/2 inch wrench, install

screw and new self-locking nut (S).

Go on to Sheet 8

TA147565

6-113