TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 198 of 772

TM 9-2350-260-20-1-2

ENGINE OIL COOLER REPLACEMENT (2A ENGINE) (Sheet 2 of 8)

NOTE

Procedures are identical for both left and right coolers.

REMOVAL:

1.

Position drip pan under engine oil cooler (A).

2.

Using 1-1/2 inch wrench, remove oil inlet hose nut

(B) from engine oil cooler connector (C).

3.

Using 1-1/2 inch wrench, remove oil outlet hose

nut (D) from engine oil cooler connector (E).

4.

After oil has drained into drip pan, use plastic

material (Item 41, Appendix D) and masking tape

(Item 57, Appendix D) to cover ends of hoses (B)

and (D) and oil cooler connectors (C) and (E).

Go on to Sheet 3

TA147572

6-121