TM 9-2350-260-20-1-2
DRAINING FUEL TANK AND REMOVING CONDENSATE (Sheet 6 of 7)
4.
Operate pump handle (E) several times to drain
any fuel left in hoses (D) and (F) and hand fuel
pump (G).
5.
Remove discharge hose (F) from 55 gallon drum
(H), and let hose hang over side of tank.
6.
Using fingers in clamp rings (J), pull clamps (K)
out and down to loosen discharge connector (L).
7.
Remove discharge hose (E) from pump discharge
connector (L).
8.
Repeat steps 6 and 7 for removal of suction hose.
9.
Install dust cover (M) on discharge connector (L).
10.
Using fingers in clamp rings (J), pull clamps (K)
out and up against dust cover (M) to clamp dust
cover in place.
11.
Repeat steps 9 and 10 for installing dust cover on
hand fuel pump suction connector and hoses.
Go on to Sheet 7
TA148233
7-158