TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 424 of 772

TM 9-2350-260-20-1-2

DRAINING FUEL TANK AND REMOVING CONDENSATE (Sheet 3 of 7)

NOTE

Steps 2 and 3 apply to removal of dust covers from hand fuel pump and hoses.

2.

Using fingers in clamp ring (D), pull clamps (E) out

and down against body of connector (F) to loosen

dust cover (G).

3.

Remove dust cover (G) from connector (F).

4.

Install hose (H) on connector (F) on discharge side

of hand fuel pump (A).

5.

Using fingers in clamp ring (D), pull clamp (E) out

and up against hose (H) to clamp hose (H) in

place.

6.

Repeat steps 4 and 5 for installing hose on

connector on suction side of hand fuel pump (A).

Go on to Sheet 4

TA148230

7-155