TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 476 of 772

TM 9-2350-260-20-1-2

FUEL TANK (LEFT) ENGINE OUTLET TUBE ASSEMBLY REPLACEMENT (Sheet 4 of 4)

9.

Connect engine for powerplant ground hop (page 5-54).

10.

Start and run engine (TM 9-2350-260-10).

NOTE

If any replaced fitting leaks while engine is running, shut down engine and tighten

or reinstall fitting.

11.

Check replaced fitting for leaks (page 5-65).

12.

Shut down engine (TM 9-2350-260-10).

13.

Disconnect engine from powerplant ground hop (page 5-67).

14.

Remove rags from engine compartment.

15.

Install 2A powerplant (page 5-14) or 2D powerplant (page 5-40).

End of Task

7-207