TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 485 of 772

TM 9-2350-260-20-1-2

INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 2 of 5)

NOTE

If your tank has 2A powerplant.

skip steps 3 thru 6 and go on to step 7.

3.

Using 9/16 inch socket and 9/16 inch wrench,

remove screw (F) and nut and lockwasher (G)

holding clamp (H) to bracket (J).

Throw

lockwasher away.

4.

Remove clamp (H) from hose (C).

5.

Using

9/16

inch

socket,

remove

screw,

lockwasher, and washer (K) holding bracket (J) to

hull.

Throw lockwasher away.

6.

Remove bracket (J).

7.

Using 1 inch wrench on fuel hose (L) and 7/8 inch wrench on elbow (M), loosen fuel line (L) from elbow (M).

8.

Using 7/8 inch wrench on fuel hose (C) coupling nut and 1-1/4 inch wrench on check valve (N), remove fuel hose

(C).

9.

Using 1-1/4 inch wrench on check valve (N) and 7/8 inch wrench on elbow (M), remove elbow (M).

Use vise if

necessary.

Go on to Sheet 3

TA148291

7-216