TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 487 of 772

TM 9-2350-260-20-1-2

INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 4 of 5)

3.

Install clamp (C) to fuel line (B).

4.

Using 7/16 inch socket, install screw, new lockwasher, and washer (D) to secure clamp (C) to hull.

5.

Using 1-1/4 inch wrench on check valve (E) and 7/8 inch wrench on elbow (F), install elbow (F) to check valve (E).

6.

Using 1-1/4 inch wrench on check valve (E) and 7/8 inch wrench on elbow (G), install elbow (F) on check valve (E).

7.

Using 7/8 inch wrench on elbow (F) and 1 inch wrench on fuel line (B) install fuel line (B) to elbow (F).

8.

Using 7/8 inch wrench on elbow () and 1 inch wrench on fuel line (H), install fuel line (H) to elbow (G).

9.

Using 1-1/4 inch wrench on check valve (E) and 7/8 inch wrench on fuel line (J), install fuel line (J) to check valve

(E).

Go on to Sheet 5

TA148293

7-218