TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 484 of 772

TM 9-2350-260-20-1-2

INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 1 of 5)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

7-215

Inspection

7-217

Installation

7-217

TOOLS:

Automotive wrench

7/8 in. combination box and

1-1/8 in. open end wrench

open end wrench

9/16 in. socket with 1/2 in. drive

9/16 in. combination box and

Ratchet with 1/2 in. drive

open end wrench

1-1/4 in. open end wrench

1 in. combination box and

Vise

open end wrench

7/16 in. socket with 1/2 in. drive

SUPPLIES:

Lockwasher (MS35338-46) (2 required) (2D powerplant only)

Lockwasher (MS35338-44)

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURES:

Remove

powerplant (page 5-1)

Drain fuel tanks

(page 7-153)

REMOVAL:

1.

Using 7/8 inch wrench to hold connector (A), use 1-1/8 inch wrench on connector (B) and remove hose (C) from

elbow (D).

2.

Using automotive wrench, remove elbow (D) from right fuel tank (E).

Go on to Sheet 2

TA148290

7-215