TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 486 of 772

TM 9-2350-260-20-1-2

INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 3 of 5)

10.

Using 1 inch wrench on fuel line (P) and 7/8 inch wrench on elbow (Q), loosen fuel line (P) from elbow (Q).

11.

Using 7/8 inch wrench, remove elbow (Q) from

check valve (N).

Use vise if necessary.

12.

Using

7/16

inch

socket,

remove

screw,

lockwasher, and washer (S) holding clamp (T) to

fuel tank.

Throw lockwasher away.

13.

Remove clamp (T) from fuel line (L).

14.

Using 1 inch wrench on fuel line (L) and 7/8 inch wrench on elbow (R), loosen fuel line (L) from elbow (R) (located

behind left fuel tank rear mount).

15.

Using 7/8 inch wrench, remove elbow (R) from left fuel tank.

16.

Remove fuel line (L).

INSPECTION:

Inspect threaded parts for bad threads.

Check tubing for cracks or bends.

Replace defective parts.

INSTALLATION:

1.

Using 7/8 inch wrench, install elbow (A) to left fuel

tank.

2.

Using 1 inch wrench, install fuel line (B) to elbow

(A).

Go on to Sheet 4

TA148292

7-217