TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 488 of 772

TM 9-2350-260-20-1-2

INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 5 of 5)

10.

Using 7/8 inch wrench, install elbow (K) to right fuel tank.

11.

Using 7/8 inch wrench to hold connector (L) and 1-1/8 inch wrench on connector (M), install fuel line (N) to elbow

(K).

NOTE

If your tank has 2A powerplant skip steps 13 thru 15 and go on to step 16.

12.

Using 9/16 inch socket, install bracket (P) to hull using screw, new lockwasher, and washer (Q).

13.

Install clamp (T) to hose (N).

14.

Using 9/16 inch socket on screw (R) and 9/16 inch wrench on nut (S), install screw (R) and new lockwasher and nut

(S) through clamp (T) and bracket (P).

15.

Tighten screw (R) and nut and lockwasher (S).

16.

Install 2A powerplant (page 5-14) or 2D powerplant (page 5-40).

17.

Fill fuel tanks.

End of Task

TA148294

7-219