TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 508 of 772

TM 9-2350-260-20-1-2

SECONDARY FUEL FILTER ASSEMBLY REPLACEMENT (Sheet 2 of 3)

REMOVAL:

1.

Place suitable container beneath secondary fuel filter to catch fuel from filters and tubes.

2.

Using 5/8 inch wrench, remove nut (A) from tee (B).

3.

Using 7/16 inch wrench to hold tee (B) and 5/8 inch wrench, remove nut (C).

4.

Using 1/2 inch wrench to hold adapter (D) and 5/8 inch wrench, remove nut (E).

5.

Remove tube assembly (F).

6.

Using 7/16 inch wrench, remove tee (B) from filter

assembly (G).

7.

Using 1/2 inch wrench, remove adapter (D) from

filter assembly (G).

8.

Using 7/8 inch wrench, loosen two nuts (H) and

remove two hose assemblies (J) from elbows (K).

9.

Using 7/8 inch wrench to hold adapters (L) and 3/4

inch wrench, remove two elbows (K).

10.

Using 7/8 inch wrench, remove two adapters (L).

11.

Using 9/16 inch socket, remove four screws (M)

and four lockwashers (N).

Throw lockwashers

away.

12.

Remove filter assembly (G) from powerplant.

Go on to Sheet 3

TA148314

7-239