TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 514 of 772

TM 9-2350-260-20-1-2

FUEL-WATER SEPARATOR OPERATIONAL TESTS (2D ENGINE) (Sheet 1 of 11)

PROCEDURE INDEX

PROCEDURE

PAGE

Manual Drain Test

7-246

Automatic Drain Test

7-248

15-Second Drain Test

7-250

Sequential Drain Test

7-252

TOOLS:

Slip joint pliers

Ratchet with 1/2 in. drive

6 in. adjustable wrench

1/2 in. combination box and open end wrench

1/2 in. socket with 1/2 in. drive

7/16 in. combination box and open end wrench

5 in. extension with 1/2 in. drive

9/16 in. combination box and open end wrench

FABRICATED TOOLS: One 3 ft cable (Figure F-8, Appendix F)

One 10 ft cable (Figure F-7, Appendix F)

SUPPLIES:

24 vdc power source

Drip pan

1/8 in. pipe plug (2 required)

Lockwasher (7410218) (4 required)

Metal containers

Lockwasher (11657469) (8 required)

(1 gal. capacity) (2 required)

Gasket (part of kit 5702738)

Fuel can (1 gal. capacity)

Lockwashers (11657469-3) (8 required)

Watch with second hand

Parts kit (5702738)

PERSONNEL: Two

PRELIMINARY PROCEDURE:

Remove 2D powerplant (page 5-27)

Go on to Sheet 2

TA148320

7-245