TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 732 of 772

TM 9-2350-260-20-1-2

TRANSMISSION SHROUD REPAIR (Sheet 5 of 6)

ASSEMBLY:

1.

Position insulation (A) on shroud (B).

2.

Using 7/16 inch socket install retainer (C) to shroud with 25 screws (D), 21 washers (E), and 4 new key washers.

Be sure to position 4 key washers properly and bend tabs with chisel and hammer.

NOTE

Both parts of turnlock fasteners must be pointing in same direction.

3.

Using 3/4 inch socket and 3/4 inch wrench, install three turnlock fasteners (F) to both sides of shroud (B).

Use new

self-locking nuts.

Go on to Sheet 6

TA146876

9-30