TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 730 of 772

TM 9-2350-260-20-1-2

TRANSMISSION SHROUD REPAIR (Sheet 3 of 6)

6.

Using diagonal cutting plies, remove lockwire (L) from 25 screws (M) on back side of retainer (N).

7.

Using hammer and chisel, bend tabs on four key washers (P) away from screw head.

NOTE

If desired speeder brace may be used to remove screws (M).

8.

Using 7/16 inch socket, remove 25 screws (M), four key washers (P), and 21 flat washers (Q) holding retainer (N) to

shroud (E).

Throw key washers away.

9.

Remove retainer (N) from shroud (E).

10.

Remove insulation (R) from shroud (E).

Go on to Sheet 4

TA146874

9-28