TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 734 of 772

TM 9-2350-260-20-1-2

TRANSMISSION SHROUD BRACKET REPAIR (Sheet 1 of 6)

PROCEDURE INDEX

PROCEDURE

PAGE

Disassembly

9-32

Assembly

9-35

TOOLS:

Putty knife

Ratchet with 1/2 in. drive

7/16 in. socket with 1/2 in. drive

Cross-tip screwdriver, No. 2

Flat-tip screwdriver

SUPPLIES:

Dry cleaning solvent (Item 54, Appendix D)

Silicone adhesive (Item 7, Appendix D)

Rags (Item 65, Appendix D)

Lockwasher (MS35338-25) ( required)

Lockwasher (MS35336-26) (2 required)

Lockwasher (MS35336-27) (7 required)

PRELIMINARY PROCEDURE:

Remove shroud support (page 9-38)

DISASSEMBLY:

1.

Using cross-tip screwdriver, remove four screws

(A) and lockwashers (B) holding retainer (C) to

bracket (D).

Throw lockwashers away.

2.

Using flat-tip screwdriver, remove retainer (C),

seal (E), and retainer (F) from bracket (D).

Go on to Sheet 2

TA146878

9-32