TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 374 of 761

TM 9-2350-261-10

TOWING DISABLED CARRIER WITH A RECOVERY VEHICLE — Continued

0064 00

REMOVE TOW BAR FROM DISABLED CARRIER AND RECOVERY VEHICLE

1.

Stop engine on recovery vehicle.

2.

Remove cotter pin from tow pintle on recovery vehicle.

3.

Pull up on pintle hook latch and open pintle.

4.

Remove tow bar from tow pintle. Close tow pintle and check that tow pintle latches closed.

5.

Install cotter pin to secure pintle hook latch closed.

6.

Remove two retainer clips and pins securing tow bar to towing eyes of disabled carrier. Remove tow bar.

7.

Install two pins in tow bar and secure with retainer clips.

REMOVE TOW CABLES

1.

Drive recovery vehicle backward until tow cables are slack.

2.

Stop engine on recovery vehicle.

3.

Remove two tow cables from tow hooks on front of disabled carrier and from tow hooks on rear of recovery vehicle.

END OF TASK

0064 00-6