TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 379 of 761

TM 9-2350-261-10

TOW START DISABLED CARRIER — Continued

0065 00

CAUTION

Don’t leave the range selector in any driving range for more than about 5 seconds under tow. If

the engine doesn’t start, shift back to N range and let the transmission rest for a few seconds.

7.

When engine starts, shift the range selector to N range. Pull back a little on both steering levers to slightly brake the

towed carrier. Signal the towing driver to stop. If you don’t get a start in three tries, stop and troubleshoot the engine,

(WP 0072 00).

8.

After disabled carrier starts, slowly bring both vehicles to a stop.

9.

Shift range selector in disabled carrier to N range.

10. Lock steering levers in disabled carrier. Pull back on both levers and press the lock buttons down.

REMOVE TOW BAR FROM DISABLED CARRIER AND RECOVERY VEHICLE

1.

Stop engine on recovery vehicle.

2.

Remove cotter pin from tow pintle on recovery vehicle.

3.

Pull up on pintle hook latch and open pintle.

4.

Remove tow bar from tow pintle. Close tow pintle and check that tow pintle latch is closed.

006500-5