TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 590 of 761

TM 9-2350-261-10

BREAK/JOIN T130 TRACK — Continued

0078 00

WARNING

Always wear eye protection when using a hammer. Eye injury may result if metal chips

contact eyes.

4.

Tighten each track fixture an equal amount to line up track pin holes. Tap long end of drive pin punch through track pin

holes to other side of track. Use hammer. Tighten track fixture as needed to obtain 20 degree angle between shoes to be

connected. Use 1-5/16 inch adjustable wrench.

WARNING

Track shoe bushing failure can cause track assembly failure and loss of vehicle control. Soldiers

can be killed or injured.

Do not use excessive force that could damage the track shoe bushing while driving in the track

pin during assembly.

5.

From inside of track, install track pin in track pin hole. As helper aligns track pin holes with crowbar, lightly tap in track

pin. Drive track pin all the way through track. Use hammer.

0078 00-6