TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 591 of 761

TM 9-2350-261-10

BREAK/JOIN T130 TRACK — Continued

0078 00

6.

Install a nut on the other end of the track pin. Tighten both nuts until 2 or 3 threads show between the nuts and the ends

of the pin or about 1/8 of an inch. Use 1/2 inch drive socket handle and 11/16 inch socket.

7.

Mark nut so unit maintenance can torque it.

8.

Remove two track fixtures. Use 1-5/16 inch adjustable wrench.

9.

Adjust track tension (WP 0076 00).

10. Stow crowbar and track fixtures on rear top deck. Stow hammer in tool bag.

11. Unblock carrier tracks (WP 0050 00).

12. Fill out DA Form 2404 and notify unit maintenance to torque marked track pin nut.

END OF TASK

0078 00-7/8 blank