TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 596 of 761

TM 9-2350-261-10

BREAK/JOIN T150 TRACK — Continued

0079 00

WARNING

Always wear eye protection when using a hammer. Eye injury may result if metal chips

contact eyes.

WARNING

You could be injured if track swings out and hits you. Do not stand in front of track being

broken.

CAUTION

Keep personnel clear when removing the end connectors to avoid being hit when they are

knocked free from the track shoe pins.

NOTE

Remove outside end connector first, then inside end connector.

9.

Install two track fixtures on both sides of the track and tighten to pull track shoes together. Use the track end connector

tool and hammer to remove the end connector. Repeat using the track end connector tool to remove the opposite end

connector.

0079 00-4