TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 601 of 761

TM 9-2350-261-10

BREAK/JOIN T150 TRACK — Continued

0079 00

7.

Install inside end connector. Only a slight amount or no leverage is needed to install the second connector if the outside

end connector is already installed.

8.

Once the end connector is installed halfway on the inside of the track assembly, remove the track fixture and track

alignment tool. Finish installing the end connector all the way on the track shoe pins until it touches the track shoe body.

WARNING

Notgettingthebolttight enough may result in death to personnel and damage to equipment if

the end connectors fall off during movement of the vehicle. Use the wrench extension over the

breaker bar to achieve more leverage when tightening the end connector bolt.

NOTE

Move vehicle far enough to position end connectors that need to be tightened on top.

007900-9