TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 610 of 761

REMOVE/INSTALL T150 TRACK SHOE — Continued

INSTALLATION

WARNING

Loss of track end connector can cause track throw and loss of vehicle control. Soldiers can be

killed or injured. Mark end connector bolts. Notify maintenance to torque bolts.

NOTE

Position track shoes at slight angle to install end connectors on both shoe pins. Proper

tightening of end connector bolts keeps them from coming loose. Have unit maintenance

properly torque as soon as possible.

1.

Install new track shoe on track.

a.

Install two track pin alignment tools over track shoe pins. Install two track end connectors on track shoes. Remove

track pin alignment tools before driving end connectors flush with pin ends.

b.

Drive end connectors flush with pin ends and install bolts on each end connector.

c.

Tighten bolts using extension wrench on handle with socket.

2.

Mark track that was replaced so bolts can be torqued later.

4.

Stow spare track shoe.

5.

Notify unit maintenance to torque bolts.

END OF TASK

3.

Join track (WP 0079 00).

0081 00-2

0081 00

TM 9-2350-261-10