TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 612 of 761

TM 9-2350-261-10

TRACK SHOE WEAR LIMITS — Continued

0082 00

2.

Track shoe pad (both T130 and T150).

Measure the height of the top of the track shoe pad above the top of the grouser.

If this is less than 1/16 inch, the pad is too worn. Have unit maintenance replace the pad.

3.

Drive sprocket flange (leading) (T130 only).

On the two bushing end of the shoe, measure the distance from the edge

of the sprocket drive hole to the outside of the bushing housing. If the distance is less than 1-15/16 inch, the shoe

must be replaced.

4.

Drive sprocket flange (trailing) (T130 only).

At the three bushing end of the shoe, measure from the edge of the

sprocket drive hole to the nearest outside edge of the shoe. If it’s less than 1/2 inch, the shoe must be replaced.

0082 00-2