TM 9-2350-261-10
TRACK SHOE WEAR LIMITS — Continued
0082 00
8.
Bushing wear (T130 and T150).
With the track on the carrier and under normal tension, insert pins of track and
spro cket gau ge into track sh oes (T13 0). If p ins of track g a uge (W P 00 94 00 , Ta b le
2
, I tem 2 2) enter bo th track shoes
freely, track bushings are OK; if pins do not enter both track shoes freely, bushings are worn. Report any worn bushings
to un it m aintenance. (T15 0) If track gaug e ( WP 009 4 00, Table
2
, Item 23) enters b oth en d conn ector p ins, bushings
are worn. Notify unit maintenance to replace track shoe.
9.
Dead shoes (T130 and T150).
Look for shoes with one end that sticks up above the same side of the next shoes on upper
side of track. This is caused by the rubber bushing rotating in the shoe. Record fault on DA Form 2404 and report to unit
maintenance. If carrier has extra shoes stowed on front of carrier, replace dead shoes. See task: REMOVE/INSTALL
T130 TRACK SHOE (WP 0080 00) or REMOVE/INSTALL T150 TRACK SHOE (WP 0081 00).
0082 00-4