TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 615 of 761

TM 9-2350-261-10

TRACK SHOE WEAR LIMITS — Continued

0082 00

10.

End Connectors (T150 only).

Visually look at the outside edge thickness of the end connectors. If any end connector

appears to be worn where the sprocket teeth make contact more than the rest of the end connectors, the end connector

mu st be removed to measure it with the track gauge (W P 0094 00, Table

2

, I

tem 2 3). The inside portio n is g enerally

where it will wear out and can only be checked when it is removed from the track shoe. If you remove the end connector

to measure it and reinstall it, make sure you have unit maintenance torque it properly before operating the carrier for any

length of time or going on any missions. Measure the outside edge thickness of end connector. If the track gauge fits

over the end connector edge, end connector is worn. Have unit maintenance replace end connector.

END OF TASK

0082 00-5/6 blank