TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 619 of 761

TM 9-2350-261-10

ASSEMBLE T130 TRACK SHOE SECTIONS OFF VEHICLE

0084 00

THIS WORK PACKAGE COVERS:

Assembly (page 0084 00-1).

INITIAL SETUP:

Maintenance Level

Operator

Tools and Special Tools

C row bar ( WP 0 094 0 0, Table

2

, Item 11)

D rive Pin Pu nch (W P 00 94 00 , Tab le

2

, Item 3 7)

G rease Gun (WP 009 4 00, Table

2

, Item 24)

Hamm er, 2 lb (W P 0094 00, Table

2

, Item 25)

Industrial Goggles (WP 0 095 00)

Open End Wrench, Adjustable (WP 0094 00, Table

2

, Item 57)

Socket Wrench, 11/16 inch (W P 0094 00, Table

2

, Item

43

)

Track Fixtures (WP 0 094 00, Table

2

, Item 21)

Wr ench Handle (WP 0 094 00, Table

2

, Item 28)

Personnel Required

Driver

Helper (H)

Equipment Condition

Track on level surface

ASSEMBLY

NOTE

Track shoe sections may come in 7 or 8 shoes per section. Make sure to count the number of

shoes during assembly. For all M113A2 FOV there are 63 track shoes required for the left

side and 64 track shoes required for the right side. Inspect each track shoe to see if anything

is wrong before it is assembled.

1.

Match two sections of track. Have helper assist.

2.

Remove nut from track pin. Use 1/2 inch drive socket handle and 11/16 inch socket.

008400-1