TM 9-2350-261-20-1
ENGINE CRANKS SLOWLY — Continued
0010 00
BY
1.
Turn MASTER SWITCH to OFF (see your -10).
2.
Clean, inspect, and repair carrier batteries (WP 0302 00
or WP 0303 00).
3.
Turn MASTER SWITCH to ON (see your -10).
4.
Measure voltage between positive (+) terminal (3) and negative
(-) terminal (4) with engine cranking for 3 to 5 seconds.
5.
Does multimeter read more than 19 volts?
BYN
GO TO
DY
(PAGE 0010 00-6)
B2Y
1.
Verify no faults found.
CY
1.
Remove engine harness circuit 6 plug (1) from main harness
circuit 6 jack (2) at carrier bulkhead.
2.
Inspect plug and jack for corrosion and/or other damage.
3.
Are parts in good condition?
CYN
1.
Front main and/or engine harness
damaged. Beyond unit maintenance
repair.
2.
Notify supervisor.
001000-3