TM-9-2350-261-20-1

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 1 OF 4

TM-9-2350-261-20-1 - Page 128 of 346

TM 9-2350-261-20-1

ENGINE DOES NOT CRANK — Continued

0009 00

A3Y

1.

Turn MASTER SWITCH to OFF (see your -10).

2.

Remove engine harness circuit 6 plug (1) from front main

harness circuit 6 jack (2) at carrier bulkhead.

3.

Inspect plug and jack for corrosion and/or other damage.

4.

Are parts in good condition?

A3YN

1.

Repair engine wiring harness or

front main wiring harness circuit 6

(WP 0312 00).

2.

Verify no faults found.

A4Y

1.

Remove eight nuts (1), washers (2), and screws (3) from master

switch panel (4). Pull panel away from distribution box (5).

2.

Inspect cable 49 (6) from master switch to distribution box.

3.

Are cable and cable ends free from corrosion and damage?

A4YN

1.

Repair master power to distribution

box cable (WP 0314 00).

2.

Install master switch panel on

distribution box.

3.

Verify no faults found.

000900-7