TM-9-2350-261-20-1

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 1 OF 4

TM-9-2350-261-20-1 - Page 127 of 346

TM 9-2350-261-20-1

ENGINE DOES NOT CRANK — Continued

0009 00

AY

1.

Install engine harness plug in front main harness bulkhead jack.

2.

Turn MASTER SWITCH to ON (see your -10).

3.

Depress start switch and hold for test.

4.

Measure voltage between starter solenoid (1) circuit 74A

terminal (2) and ground.

5.

Does multimeter read more than 17 volts?

AYN

1.

Repair engine harness circuit 74A

(WP 0312 00).

2.

Verify no faults found.

A2Y

1.

Measure voltage between starter solenoid (1) cable 6

terminal (2) and ground.

2.

Does multimeter read less than 17 volts?

A2YN

GO TO

BY

(PAGE 0009 00-8)

000900-6